DIY Wall Art & How to Transfer Image to Wood

It is super fun and easy to transfer image to wood!

These beautiful wooden wall art pieces take less than one hour to make. They are very easy to assemble, because they do not require any frames.

This simple technique also works great to transfer letters, stamps, and other motifs.

Once you learn to transfer image to wood, you will be able to make all kinds of printed wood art, home decor or gifts for loved ones.

UPDATE: We just found an even better method to transfer images to wood! Here’s the tutorial! And look at the amazing details on that pineapple! 🙂

*Some resources in article are affiliate links. Full disclosure here.

Remember these wooden crates inspired by vintage farm and orchard crates? I made them using the same method!

Make a charging station from pallet scrap wood, and clear up the clutter on your table or desk! Plus some gorgeous vintage crate labels as a free download!

DIY vintage inspired crates.

Materials and tools:   

Here’s a quick video tutorial


Here’s an outline of the process. Check out the crate tutorial for more detailed photos plus my 3 failures when I first learned this technique.

Step 1: Cut wood and sand edges. For this project we cut 1″x8″ common pine board into 8″x8″ pieces.

Step 2: Print image on wax paper.

Fold and tape one end of  the wax paper onto a piece of regular 8.5″x11″ paper, this will be the end that first go through the printer. Leave the rest of the paper loose. Print your image so the ink goes on the wax paper or the glossy side of the  backing paper for labels or stickers  . Be very careful not to touch the printed surface.

Check out the wood crate tutorial for more detailed photos for Step 2 & 3.

IMPORTANT: flip the images if it contain words – remember they are going to be transferred (mirrored)!

You could also create your own art and transfer it to wood. Here’s a tutorial on how to paint watercolor flowers easily with no art experience!

paint watercolor flowers-a piece of rainbow blog

Step 3: Transfer image to wood.

Take a wet piece of dry sponge or rag, wet the surface of the wood you are about to print on, then use the dry sponge or rag to absorb the water a little. The goal is to get the wood to absorb the ink, but if the wood is too wet, the ink would be runny.

You can always test on a piece of wood to get a feel of how wet/dry the wood should be.

Place the design onto the wood surface, try not to shift it once the paper touches the wood.

Hold it down and use a soft sponge or rag to rub the wax paper like you would make a print, and you will be delighted to see how beautifully the image got transferred onto the wood!

You can even repeat this step and keep layering images until you are happy with the result.See how easy it is to transfer image to wood? I made four pieces in no time!

After the image transfer dries for at least a couple of hours,  the final step is to protect the image with a nice furniture wax.

This step is optional, the added bonus is that the colors of the wood and images become richer and deeper once you apply the wax.

Check out the wood crate tutorial for the home-made furniture wax recipe.

A reader asked about making these as drink coasters and how to seal them. The wax finish is water resistant. You can also use a clear acrylic spray / sealer like these instead of the wax.

Let sit for 24 hours, and you are ready to use them or give them as gifts!

Detailed tutorial on how to transfer image to wood easily and make beautiful, one-of-a-kind printed wood wall art, home decor or gifts! - A Piece Of Rainbow

Add saw-tooth hangers like these for hanging.

Now you have some unique wall art : botanical prints combined with the natural beauty of wood!

The gorgeous illustrations are from the fabulous Graphics Fairy . I also have some botanical art  from this DIY 2-minute candle holder project for you to download for free .

Make a set of 4 lovely butterfly and flower candle holders in minutes! Download free vintage illustrations to make your own beautiful frosted luminaries!

DIY 2-minute candle holders & free printable botanical illustrations.

You may also like : 5- minute DIY Anthropologie style cabinet knobs

Anthropologie worthy DIY cabinet or door knobs that look like hand painted designer ceramic knobs! Download beautiful designs to make your own set easily! - A Piece of Rainbow

Happy creating! See you next week!

68 Comments

  1. I would like to transferr a baby picture to a framed blank canvas. What is the best way to do that?

    Thank you for any help.

  2. So this procedure only works on raw wood? You can’t do it on painted wood, acrylic or chalk paint? Thanks

  3. I cannot download the pictures for the pallet it keeps sending me back to subscribe to you which I have done. Please give step by step instructions where and how to download. I went under your tutorial. Thank you

    • hi Janine! the link to all downloads library is in the welcome email and weekly newsletter (comes out on sundays). let us know if you still have trouble 🙂

  4. I love the tip about taping the wax paper to a piece of regular printer paper. I had seen a previous tutorial that said to cut the wax paper to the size of printer paper, but that was difficult and time-consuming. The printer would not accept the paper if it was even a millimeter off. Taping the wax paper to the printer paper works MUCH better. Thank you!

    • thank you Renee! maybe someday there will be an easy printer for wax paper, tissue paper and all the craft papers we want to print on! 🙂

    • hi! if you are thinking about already printed book pages etc, you will need to use glue or acrylic type medium to transfer. 🙂

  5. My printer bled and smudged when it printed on the wax, the image did not take to the wax paper well. Any ideas? I’m using an inkjet, but have access to a laser would that work any better?

    • hi kory! i would set the inkjet to print on normal or light / draft or glossy setting. if you print on “best” that would be too much ink. laser print with heat, so i am not sure. let us know if you try it!

  6. Love it! These are beautiful! I just used this method for a wood sign I am making. I did have better luck just threading the wax paper through the printer. Taping it down caused a paper jam! Eek! Other than that, it transferred really well! I might have a new obsession. 😉

  7. Do you need to have the sponge damp when putting the print on, like on top of the wax paper? I have a picture of my three sister and myself, do you think I could do this with the picture? I would love to make all of us one of these.

    • hi, the sponge you use to press down the wax paper should be dry. photos with less fine details and more contrast will show up better. i would test on a small piece of scrap wood first. 🙂

  8. Beautiful! Do you think a light stain made from coffee would have an adverse effect on the transferring of the picture? I think it would give the wood a nice warm look to it.

  9. This is great! Just wanted you to know: olive oil will go rancid over time, a better choice would be mineral oil. Just a friendly suggestion. I don’t want anybody’s artwork to eventually stink or darken or worse. I think I will use this technique on some of my projects. Thanks for the tutorial! Have a glorious day!

    • hi jenni, thank you so much for sharing your tips! =)
      i think the bees wax have preservative qualities, and i have not noticed anything smell rancid. but thank you for the great input! =)

      • Hi thanks for your ideas. I only have a hp printer. Can it work? As we cannot afford a inkjet or laser printers. We do not have the other types of paper.

        Your a star.
        Thanks

  10. Is there a trick to getting the image I print out not to run on the wax paper? I followed step 2, but the image keeps getting smeared.

  11. Commenting again because I forgot to ask a question. Do you have trouble with the wax paper getting jammed in your printer? I had mine get stuck when I tried to print for something similar to this project in the past and I’m afraid of it happening again. Thanks for any tips.

    • hi adrienne, there’s definitely a good tip here on how to tape the wax paper onto a piece of regular paper. the link is in step 2 ! 🙂

      • Thanks, Ananda! I did attach the wax paper to a piece of thicker printer paper that is more like cardstock but it still jammed (my printer and I have a quarrelsome relationship!) I think what I need to do is invest in a better printer, which is on my to-do list. Thanks for trying to help!

  12. I’m going to try out this project next weekend. I’m going to pick up the materials tomorrow since I have a Michaels coupon. Thanks for mentioning that raw canvas works as opposed to primed. I want to do mine on canvas.

  13. Love this tutorial so much. Great for people who want to do these kinds of transfers and don’t have a laser printer! Most tutorials call for laser printers. Do you think this method would work on canvas?

  14. Hello!
    For some reason mine is not printing vibrantly, and when I go to transfer it’s barely doing anything. I know I can’t be messing this up, it I a fairly foolproof method. or so it seems?
    Any advice 🙂
    Thanks!!
    Jennifer

    • Hi jennifer! you can adjust the saturation of an image in gimp (free) or similar programs before printing . the key to a good transfer is to have the right amount of moisture on the wood. look through the detailed steps 🙂

  15. I have a question about the wood. Can the wood be treated or untreated to work. My ink bleed when I pressed the sponge to it.

  16. These are beautiful and process looks simple. Do you know if this will also work on painted wood?

  17. This is a great idea. Where did you find the images you used in the tutorial? I really like them!

  18. What an outstanding tutorial to make almost anything you’d like to put on a wall! Thanks so much, have pinned to do!

  19. Beautiful work!! How well does the inkjet ink hold up for you without fading? Does the wax prevent the fading?
    Thanks

    • great question! the crates we made from 3 years ago still look great. those kept away from direct sun look like new. the wax is more for protecting and seasoning the surface of the wood. 🙂

  20. I really love this idea! I’m half scared I’d mess up my printer though. So it feeds through without jamming?

  21. i was thinking about doing something like this – i’m always seeing sayings on small pieces of wood.

    my fiancee loves decorations with quotes – i want to put some on a short 2×4 and see how it looks!

Leave a Reply

Your email address will not be published. Required fields are marked *

Send this to a friend