DIY Star Shaped Clothes Drying Rack

Imagine a functional piece of furniture: not only is it beautiful, but it magically expands like a sunflower blossoming, or a kaleidoscope unfolding…

Here it is – a Star Shaped Clothes Drying Rack.

Make a beautiful star shaped clothes drying rack that magically expands, using very simple tools and materials! Detailed tutorial and free building plans. - A Piece of Rainbow

It folds into a tiny footprint for easy storage. It expands to 4.5 feet tall and wide with more usable space than any drying racks we have seen.

The best part? This gorgeous clothes rack takes only $18 to make with two easily accessible materials: plywood and dowels, and very simple tools.

* Some resources in article are affiliate links. Full disclosure here .

There will be a free plan for you to download at the end! Watch this drying rack in action here-

You might know how much I love geometry from this project inspired by the sacred geometry of Notre Dame rose windows: an old glass tabletop turned into a stained glass mosaic wall light.

Make Stained Glass Mosaic | A Piece of Rainbow

Here are my sources of inspirations for this drying rack. Amish people have designed a similar clothes horse you can purchase for $150 at Lehmans. UK designer Aaron Dunkerton created the star shaped clothes horse which is in the process of production. I will add a link here once it is for sale. ( Sources 1 | 2  ) I modified the designs a bit to eliminate some dowels that are closely overlapping.

star shaped DIY drying rack

Materials and tools:

( Some of the helpful resources are affiliate links. Full disclosure here. )

star-shaped-clothes-drying-rack-apieceofrainbowblog (9)

Please follow important basic safety practices while building. Always wear eye goggles, work on a clean sturdy and flat surface, properly clamp each piece, and learn to use tools properly.

star-shaped-clothes-drying-rack-apieceofrainbowblog (14)

Step 1:

Cut plywood into (48) strips of 16” long by 1” wide. Table saw is best for this, but you can cut these nicely with the help of a saw guide attached to a circular saw or jig saw.

star-shaped-clothes-drying-rack-apieceofrainbowblog (3)

Step 2:

Mark center of three 3/8” holes on each plywood strip as shown in the dimensions below. It is VERY important to be as accurate as possible in this step.

star-shaped-clothes-drying-rack-apieceofrainbowblog (4)

The more accurate you are, the more smoothly the whole structure expands and folds when everything comes together.

star-shaped-clothes-drying-rack-apieceofrainbowblog (26)

Since we do not have a drill press YET, we clamped a few pieces together to reduce the amount of marking and drilling. A drill guide can help the drill stay vertical through the holes.

star-shaped-clothes-drying-rack-apieceofrainbowblog (6)

The dowels will fit tightly into the holes. This will hold the plywood strips in place, while allowing them to rotate easily.

Step 3:

Cut (12) 3/8” x 48” long dowels in half into 24” long pieces. Cut (1) 3/8” x 48” long dowel into (12) 1.5” sections.

star-shaped-clothes-drying-rack-apieceofrainbowblog (5)

Sand all the cut pieces. Now we are ready to assemble!

Step 4:

Assemble (2) plywood strips with (1) 1.5” long dowel through the middle holes.

star-shaped-clothes-drying-rack-apieceofrainbowblog (7)

This will be our basic Module A. You will end up with (24) Module As.

Step 5:

Take (2) modules, mirror them as shown in diagram: yellow strips inside, pink strips outside. IMPORTANT: rotate the outside strip so the longer section between the middle and end holes are all pointing the same direction.

star-shaped-clothes-drying-rack-apieceofrainbowblog (24)

Connect the inside strips with (2) 12” long dowels, through corresponding holes.

Make (12) of these. We will name them Module B.

Step 6:

Start with one Module B, add the next one by snapping the (pink) outer strips onto the dowels connecting the inner strips, always keeping the longer section between the middle and end holes pointing the same direction.

star-shaped-clothes-drying-rack-apieceofrainbowblog (25)
star-shaped-clothes-drying-rack-apieceofrainbowblog (8)

When you reach the last one, it is time to test your star-shaped clothes drying rack.

collapsible diy clothes drying rack,

It is truly a magical moment when the 12-pointed star takes its shape. Snap the last outer strips onto the corresponding dowels to hold the star in place. Pop them off to collapse the structure.

Now we have a drying rack that will make clothes drying so much fun!

star-shaped-clothes-drying-rack-apieceofrainbowblog (13)
star-shaped-clothes-drying-rack-apieceofrainbowblog (12)

It measures 4’6” tall and wide. In the photo below, my husband’s shirt size is men’s extra-large, and mine is women’s small – just to help you get a sense of how much the drying rack can hold, which is quite a lot.

diy clothes drying rack, clothes horse

Are you ready to build one? Go for it, it is so worth the effort!

I made a set of free plans with 7 important tips, variations and improvements for you, which you can download below:

diy clothes drying rack, clothes horse

If you take the time to be as accurate as possible in each little step, you will amaze yourself with what you can build with just a few simple tools and materials!

Love geometry? This pendant lamp also expands magically, and you can make one from paper grocery bags!

Make Origami Lampshade | A Piece Of Rainbow

A couple of useful and beautiful things to build for the home – Pallet wood crates with a super easy image transfer method

Make a charging station from pallet scrap wood, and clear up the clutter on your table or desk! Plus some gorgeous vintage crate labels as a free download!

Rope shelf you can build with just a drill.

Easy to build and hang, this beautiful gold and turquoise DIY rope shelf is also collapsible. All you need is a drill to build it!

44 Comments

  1. I LOVE THIS! I’m making it soon! I have a question though:
    On step 5, shouldn’t the dowels each be 24″ long (except the one that was cut into 1.5″ pieces) …..not 12″??
    Thanks for the help.
    -Carol

    • hi carol! the dowels need to be the same length, anywhere between 12″ to 24″, which will be the width of the rack. ours is 12″ and it feels plenty big! 🙂

  2. Page 7, of the downloadable instructions and tips is “messed up”. Some of the words are running together, or on top of each other. I’d really like to make this but would like these TIPS also. HELPPPPPPP! 🙂

    • hi carol, we just checked and the pdf page 7 looks good here! 🙂 maybe try download it or open it on a different computer or tablet? if you still have trouble let us know!

  3. Can you tell me the approximate weight of the finished product? I want to build one for someone who is elderly and weight is a factor.
    Also, using such thin plywood, have you seen any problems with side impact on the rack?

    • it is quite light because of the thin plywood, and the plywood holds up. if you plan to keep the rack outside or in a humid climate, i would seal them first. 🙂

  4. I am so overwhelmed, looking at all your projects love them all, you are so very creative, OMG. Wish I was, have to try at least one, thanks so much for sharing.

  5. I love this!!

    Here in NZ all the drying racks you can buy are expensive and very poorly made.

    Lots of linear feet of hanging means lots of room for babies clothes, which is also nice.

    Thank you. I’ll post if/when I’ve made it.

  6. Am going to make one of this next summer. Since neither I nor hubby are very good at straight cuts even with a table saw, am wondering if 1/4″ thick lath would work. Probably a bit more expensive than the plywood.

  7. Hello there I LOVE LOVE LOVE THIS! Would it be possible for me to buy one ? i.e. could you make one for me?

  8. Wowzers! So excited to begin this DIY. Unfortunately, the link provided for the pdf plan download does nothing when I select it. Would you please provide another link (either in article or emailed to me)?

    • hi amber, i had some friends testing it- it should be working and give you a 7-page pdf, which you can save. maybe email the link to some friends and have them save and email the file to you? =)

  9. I would love to build one of these Star Shaped Clothes Rack, however, I can’t find the link that allows me to download the plans. Could you please tell me what I’m doing wrong? Or send me the plans? I could probably make one from your wonderful blog, but I would rather have the actual plans. Thank you for your kind assistance.

  10. This is cool! I’m going to make one for my daughter. Also make a Wishing Well with your 1 x 2. Just get a few more dowels to hook them together and then assemble a roof .

  11. Waouh!!!!!!!!!!!!!!!!! I love it! Beautiful! Lovely+++++
    But i might never be capable to make it so i can just swoon over your photos! And imagine one in my home,my garden…
    Tenderness

  12. This is so awesome!! I can’t tell you how much I enjoyed looking at your pictures of this amazing creation. I really love that it is a needed item that’s pretty and it’s great that it folds up for storage. I really could use one of these and after reading your post, I think I could make it.

  13. Oh my! I am amazed and impressed with your skills! This would be a math nightmare fore me to figure out.

    Super tutorial and instructions, I love how easy it looks to use, and it’s PRETTY too!

    pinning!
    gail

Leave a Reply to Nikki-annCancel Reply

Send this to a friend